[Mikrotik] Simple 1:1 NAT on Mikrotik

Jacob Heider jhheider at gmail.com
Tue Jun 12 13:55:28 CDT 2012


Have you assignedthe public IP on the public interface of the MT? You 
probably also want the reflexive rule as shown here:

http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT#1:1_mapping

> Mike Lyon <mailto:mike.lyon at gmail.com>
> June 12, 2012 14:51
> Howdy,
>
> I'm killing myself over here. Trying to get a 1:1 NAT working on an MK
> 433AH running 4.13. I've entered this in:
>
> /ip firewall nat add action=dst-nat chain=dstnat disabled=no
> dst-address=<public IP address> \ to-addresses=<internal private IP 
> address>
>
> I can ping and can connect to the internal IP address in winbox via ssh. I
> know the internal host can access the internet and all routing is working.
>
> >From the outside world though, I cannot ping the public IP address i've
> assigned to the 1:1 NAT nor can I access it via ssh.
>
> What else am I missing?
>
> Thanks,
> mike
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://www.butchevans.com/pipermail/mikrotik/attachments/20120612/e8e58a3f/attachment.html>
> _______________________________________________
> Mikrotik mailing list
> Mikrotik at mail.butchevans.com
> http://www.butchevans.com/mailman/listinfo/mikrotik
>
> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik 
> RouterOS
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.butchevans.com/pipermail/mikrotik/attachments/20120612/73f6a2fc/attachment.html>


More information about the Mikrotik mailing list