[Mikrotik] RB951-2N MIMO configuration

Tayeb Meftah tayeb.meftah at gmail.com
Thu Dec 20 15:25:01 CST 2012


dear scott,
please can you send a step by step how to enable this crapy mimo ?
i want at least 150 or if pocible 300.
thank !
----- Original Message ----- 
From: "Scott Lambert" <lambert at lambertfam.org>
To: "Mikrotik discussions" <mikrotik at mail.butchevans.com>
Sent: Thursday, December 20, 2012 10:22 PM
Subject: Re: [Mikrotik] RB951-2N MIMO configuration


> On Thu, Dec 20, 2012 at 11:42:21AM +0100, Tayeb Meftah wrote:
>> Hello,
>> do i need any special configuration to be able to have a MIMO situation?
>> My Wireless range is too crazy these days ;-)
>> also the Speed in my Laptop with the RB is 65.00MB/S, no clue why.
>> if used with a linksys E3200, i got 300Mbit/s
>
> Enabling both MIMO channels will get you near 150Mbps.
>
> To get to 300Mbps you will have to set channel width to "20/40MHz
> HT Above" or "20/40/MHz HT Below".  But you may not be able to
> utilize the throughput potential gained by going to a 40MHz channel.
> Depends on your network configuration and what you want to do with
> it.
>
> -- 
> Scott Lambert                    KC5MLE                       Unix 
> SysAdmin
> lambert at lambertfam.org
> _______________________________________________
> Mikrotik mailing list
> Mikrotik at mail.butchevans.com
> http://www.butchevans.com/mailman/listinfo/mikrotik
>
> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik 
> RouterOS
> 



More information about the Mikrotik mailing list