[Mikrotik] dst-nat question

Jeromie Reeves jreeves at 18-30chat.net
Thu Apr 19 22:29:14 CDT 2012


would be faster to just terminal the MT and telnet or ssh the bullet
and add the gateway by hand, then hit the gui

On Thu, Apr 19, 2012 at 7:22 PM, Sam Tetherow <tetherow at shwisp.net> wrote:
> If you have ssh on on the bullet, just log into the 750 then
> /system ssh 192.168.32.3 user=ubnt
>
> (replace ubnt above with the appropriate username if you changed it in the
> bullet)
>
> from the command prompt:
> route add default gw 192.168.32.1
>
> Assuming 192.168.32.1 is what the default gateway should be
>
> On 04/19/2012 06:24 PM, Matt Larsen - Lists wrote:
>>
>> I have a customer radio that we can't get to because the installer forgot
>> to put in a default gateway.
>>
>> It is a Ubiquiti bullet5 radio with an IP address of 192.168.32.3.
>>
>> I have a Mikrotik 750 at the base with an IP of 192.168.32.1 on the inside
>> interface and 10.17.18.3 on the external interface.
>>
>> What set of commands would I have to use to set up a dst-nat to send port
>> 8080 on the 10.17.18.3 interface to port 80 on the 192.168.32.3 interface so
>> I can set the damn gateway?
>>
>> I'd send someone out to fix it, but the customer is 120 miles away from
>> our office!   At least their Internet is working fine.
>>
>> Thanks!
>>
>> Matt Larsen
>> vistabeam.com
>>
>>
>>
>>
>> _______________________________________________
>> Mikrotik mailing list
>> Mikrotik at mail.butchevans.com
>> http://www.butchevans.com/mailman/listinfo/mikrotik
>>
>> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
>> RouterOS
>
>
> _______________________________________________
> Mikrotik mailing list
> Mikrotik at mail.butchevans.com
> http://www.butchevans.com/mailman/listinfo/mikrotik
>
> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS


More information about the Mikrotik mailing list