[Mikrotik] Best way to do transparent PTP bridge
josh at imaginenetworksllc.com
Mon Sep 20 17:34:45 CDT 2010
With one radio you want to use ap-bridge and station, then go to the
WDS tab and set the first two fields appropriately.
1100 Wayne St
Troy, OH 45373
On Mon, Sep 20, 2010 at 6:15 PM, Bill Prince
<part-15 at skylinebroadbandservice.com> wrote:
> As in a backhaul. What last did was create a bridge between the ether1 and
> wlan1 on both units. Then I set the primary to "bridge", and I set the
> slave to station-pseudobridge-clone (no WDS).
> According to the way I read it, the pseudobridge-clone should be transparent
> (no munging the MACs of the attached devices into the MAC of the PTP
> station). It doesn't seem to take a lot of processing power, and you don't
> have to create an addition bridge for the WDS.
> Mikrotik mailing list
> Mikrotik at mail.butchevans.com
> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
More information about the Mikrotik