[Mikrotik] Simply Queues

ccrum ccrum at dot11net.com
Thu Aug 6 07:32:43 CDT 2009


I think it depends on the name. If you name them the same it will 
probably throw and error and continue. If you name then different, then 
it will set up a new queue and use the one that is the highest number in 
the list.

Cameron

Brian Bearce wrote:
> Just curious. I have setup queues manually (not the full range). Say I have
> a setup queues manually with the range below and I run this command. Will it
> skip the ones I have entered already or will it create duplicates?
>
>
> -----Original Message-----
> From: mikrotik-bounces at mail.butchevans.com
> [mailto:mikrotik-bounces at mail.butchevans.com] On Behalf Of steve
> Sent: Thursday, June 04, 2009 11:57
> To: 'Mikrotik discussions'
> Subject: Re: [Mikrotik] Simply Queues
>
> What I do is use the following script to create an queue for each IP in the
> range.
>
> :for i from=2 to=254 do={/queue simple add name="172.16.64.$i"
> target-address="172.16.64.$i/32" max-limit="256000/800000"
> burst-limit="0/1500000" burst-threshold="0/400000" burst-time="0s/1m"}
>
> This script would create a Simple queue for IP's 172.16.64.2 through .254
> With a Upload of 256K and a download of 800K the download is bursting to
> 1.5M for 60 seconds with a threshold of 400K that they have to fall below
> before it allows them to burst again.
>
>
> Steve Barnes
> RCWiFi Wireless Internet Service
>
>
> -----Original Message-----
> From: mikrotik-bounces at mail.butchevans.com
> [mailto:mikrotik-bounces at mail.butchevans.com] On Behalf Of Chris Gotstein
> Sent: Thursday, June 04, 2009 11:49 AM
> To: Mikrotik discussions; MikroTik at part-15.org
> Subject: [Mikrotik] Simply Queues
>
> This is my first time dealing with queues.  When setting up simple 
> queues, i set the download at 1500k and upload at 384k for each subnet. 
>   Now does this mean that each customer (ip address) will get this rate, 
> or is it an aggregate for the whole subnet?
>
>   



More information about the Mikrotik mailing list